A Guide to Pool Maintenance
If you own a swimming pool, then you have to make sure that it is always clean, and this task is not as difficult as your think. When talking about a pool’s preservation needs, it will depend on the kind of pool you have. If you want to keep a clean and healthy swimming pool, you need to do frequent, routine care. If you want to prevent issues such as murky water or busted pumps, make sure that you get yourself a pool maintenance guide before repairing or using equipment. Doing regular pool maintenance will free you from anything that will cause annoyance and emergency trips to the store for supplies. Hiring a professional to clean your swimming pool is a great idea, but you don’t just give all the responsibility to them because you still need to do a few things to ensure that your pool remains in good condition for a long time.
Below are some guidelines for pool maintenance.
The chemistry of your pool needs to be observed at least 2 time a week through the summer and once during winter. If your pool is winterized during the winter, then there is no need to test the water. It is still possible for algae and bacteria to grow even if it is very cold outside. Your pool should be shocked every 6 weeks or so during months.
It is important to check the water level once a month and adjust as required. It should be at the middle of the skimmer if you are checking the water level. A very high water level will not help the water circulate and move.
There should be regular scrubbing of walls and tiles. Scrubbing the walls will help eliminate algae issues. If you keep your tiles clean, it will save you money. Algae likes to stick to walls and steps. Always clean your walls and steps of algae.
If there are broken or misplaced drains and suction supplies, replace them. This is something you should do if you want a well maintained swimming pool. Air is sucked into the system if there is a suction side leak at the pump. Check the return lines when you run your equipment and look at the water coming out and this will help you gauge leaks. You will know that excessive air is getting into the system if your find a lot of bubbles. If too much air gets into the system, your pump can run dry and cause it to freeze. There is a need of replacement which can be very expensive.
The pH level should not go above 8.0. The pH of the pool should always be checked so that the maximum potential of the chlorine in the pool can be used. The effectiveness of the chlorine will be reduced if the pH reaches below 7.2. This means you will be adding more and more chlorine but getting less benefit from it. You don’t save money this way.